User guide

SerVision MVG 400 System Guide
Configuring the MVG 400 98
2. Select the Enabled checkbox. The fields required to configure the camera settings are
added to the screen.
Figure 90: Camera enabled
Note: If Enabled is not selected, the camera cannot record and will not appear in client
applications.
3. Fill in the fields as follows:
Field Description
Description Type a name for the camera (up to 20 characters). Each of the
cameras must have a different name.
The camera names are used to identify the camera in client
applications.
Note: If the MVG 400 will be working in conjunction with an SVBackup
server, use only English characters in the name.
Video type Select the video format (PAL or NTSC).
For additional information, consult the camera documentation.
Note: If multiple cameras are connected, all must use the same video
type. Using some PAL cameras and some NTSC cameras can cause
problems with the video.