User guide

SerVision MVG 400 System Guide
Configuring the MVG 400 90
Figure 82: AVV screen expanded
3. Fill in the fields as follows:
Field Description
Server Fill in the IP address or hostname of the AVV server.
Port Fill in the port used for ftp connections to the AVV server (usually 21).
Upload Path Fill in the path of the ftp directory on the AVV server. The MVG 400
will upload the video files to this directory.
Username Fill in the username required to access the ftp directory on the AVV
server.
Password Fill in the password required to access the ftp directory on the AVV
server.
Download
Path
Fill in the path of the http directory on the AVV server. You will
download the video files to your PC from this directory.
4. Under Recorder Settings, do one of the following:
• If you want to use the same recorder quality settings for the downloaded video that
are used for recorded video that is stored on the MVG 400, select Use Default
Settings. Then skip to step 6.
• If you want to select different recorder quality settings, clear the Use Default
Settings checkbox. The fields required to configure the recorder settings are added to
the screen.
Figure 83: AVV custom recorder settings