User guide

SerVision MVG 400 System Guide

Configuring the MVG 400 89

This section explains how to configure the settings that make it possible for the system to

upload video to an AVV server. Video is only actually uploaded if AVV is activated in the

configuration of the device triggering an event – a camera, sensor, or activator. For

information on configuring a device to trigger automatic uploading of events to an AVV

server, see the sections about configuring that type of device:

• Video Motion Detection (VMD), page 101

• Configuring Video Lost, page 108

• Sensor and Activator Settings, page 115

NOTE: A list of devices that are configured to trigger AVV is displayed at the top of the

AVV screen.

To configure the settings of the AVV server:

1. In the Main Menu, under System, click AVV. The Alarm Video Verifications screen

opens:

Figure 81: Alarm Video Verifications screen

2. Under AVV, select Enabled. The fields required to configure the AVV settings are

added to the screen.