User guide

SerVision MVG 400 System Guide
Configuring the MVG 400 85
Field Description
Use Select the network connection to use to connect to send the e-mail
message:
• Any: The unit can use any available network connection; it
will connect using the highest priority connection available
(as defined under Network Priorities; see
Network
Priorities
, page 73).
• LAN: The unit should only use a LAN connection. If none is
available, the unit will not send the e-mail.
• WiFi: The unit should only use a WiFi connection. If none is
available, the unit will not send the e-mail.
• Modem: The unit should only use a Modem connection. If
none is available, the unit will not send the e-mail.
SMTP Server Fill in the SMTP server of your e-mail account as they appear in
your e-mail software configuration.
SMTP
Authentication
If the SMTP server requires authentication, select Enabled. The
Username and Password fields are added to the screen.
Username Fill in the username of your e-mail account as it appears in your e-
mail software configuration.
Note: This field only appears if SMTP Authentication is enabled.
Password Fill in the password of your e-mail account as it appears in your e-
mail software configuration.
Note: This field only appears if SMTP Authentication is enabled.
Figure 78: SMTP server and authentication settings
Note: Internet mail accounts (e.g., Yahoo or MSN) are not supported. A list of free
SMTP servers can be found at http://www.e-eeasy.com/SMTPServerList.aspx
.
7. Click Update, and then save the settings. They will be implemented after the unit is
restarted (see Saving Configuration Changes, page 139).
SMS Message Templates
The following codes can be included in SMS message templates: