User guide

SerVision MVG 400 System Guide

Configuring the MVG 400 84

4. Under Image Size, select the size of the JPEG image that will be attached to e-mail

notifications that contain images (SIF or VGA).

Figure 77: Image Size field

5. If you want to send SMS notifications, under SMS Connection Information, fill in the

fields as follows:

Field Description

Use Select the network connection to use to connect to send the SMS:

• Any: The unit can use any available network connection; it will

connect using the highest priority connection available (as

defined under Network Priorities; see

Network Priorities

page 73).

• LAN: The unit should only use a LAN connection. If none is

available, the unit will not send the SMS.

• WiFi: The unit should only use a WiFi connection. If none is

available, the unit will not send the SMS.

• Modem: The unit should only use a Modem connection. If

none is available, the unit will not send the SMS.

Username Fill in the username of your Clickatell account.

Password Fill in the password of your Clickatell account.

API Fill in the API ID of your Clickatell account.

Note: If you do not have an active Clickatell account, open one at

http://www.clickatell.com

Note: SerVision cannot provide support for problems related to the Clickatell service.

For technical support, please contact Clickatell.

6. If you want to send e-mail notifications, under E-mail Connection Information, fill in

the fields as follows:

Ima

e Size field