User guide

SerVision MVG 400 System Guide
Configuring the MVG 400 82
Once you have configured the notification settings, you can test them by sending a sample
notification. For additional information, see Testing Notification Settings, page 86.
This section explains how to configure the settings that make it possible for the system to
send notifications. Messages are only sent if the device triggering an event – a camera, sensor,
or activator – is configured to send notifications of events. For information on configuring a
device to send notifications of events, see the sections about configuring that type of device:
• Video Motion Detection (VMD), page 101
• Configuring Video Lost, page 108
• Sensor and Activator Settings, page 115
D
D
D
To configure SMS and e-mail notification settings:
1. In the Main Menu, under System, click SMS & E-mail. The SMS and E-mail screen
opens:
Figure 74: SMS and E-mail screen
2. Under Message Template, modify the text of the message that should be sent to the
SMS recipients on the list, as necessary. The message can contain up to 45 characters,
including spaces. It should not include quotation marks of any kind (
", ', or `).
NOTE: The message text can contain variables that are replaced by the system with
relevant values in the actual message. For example, the message can include
the name of the device that triggered the event. For additional information, see
SMS Message Templates, page 85.