User guide

SerVision MVG 400 System Guide
Configuring the MVG 400 80
Authentication
Access to the configuration utility itself is controlled by username-password authentication.
By default, the username is
svuser and the password is servconf. It is recommended that
you change these values.
Client access to the unit – via PC, PDA, or cellular telephone – for video viewing and
downloading, device control, etc., is also controlled by username-password authentication. By
default, the authentication is “anonymous.” This means that the username is
anonymous and
the password is
guest. It is recommended that you personalize these values as well.
D
D
D
To modify usernames and passwords:
1. In the Main Menu, under System, click Authentication. The Authentication screen
opens:
Figure 71: Authentication screen
2. To modify the username and password for access to the configuration utility, under
Configuration User, modify the Username and Password fields as desired. Under
Confirm Password, type the password a second time to ensure you typed it correctly.
3. To modify the username and password for client access to the MVG 400 unit, under
Client User, clear the Enable Anonymous Authentication checkbox. The fields
required to set the username and password are added to the screen.
Figure 72: Client user authentication
Modify the Username and Password fields as desired. Under Confirm Password, type
the password a second time to ensure you typed it correctly.