User guide

SerVision MVG 400 System Guide
Configuring the MVG 400 79
Field Description
Hostname Fill in the hostname of the DDNS server.
If you are using either
No-IP or DynDNS , these values should have
been supplied to you when you set up your account.
If you are using the SerVision
SV-DDNS service, the default hostname
is the MVG 400's default system name. You can modify this name as
you wish. The name you choose should not include any spaces. In
addition, you should make sure the name is unique. For example,
include your name or the name of your company in the hostname.
The complete hostname on the SerVision SV-DDNS server will be
composed of the name you type plus .TVG.CC. For example, if you
type “Jane_Smythe_Office,” the hostname on the server is
Jane_Smythe_Office.TVG.CC.
Note: Once DDNS is set up, changes to the server name will have no
effect on the DDNS settings.
4. If you are using either the No-IP or the DynDNS DDNS service, fill in the Username
and Password fields. The username and password should have been supplied to you by
No-IP or DynDNS when you set up your account there. Under Confirm Password, type
the password a second time to ensure you typed it correctly.
Note: SerVision cannot provide support for problems related to the No-IP or DynDNS
DDNS services. For technical support, please contact the service providers.
5. If you are using the SV-DDNS service and you want to change the address of the DDNS
server, select Advanced. The fields required to specify the server are added to the
screen.
Figure 70: Advanced SV-DDNS settings
Fill in the fields as follows:
Field Description
DDNS Server Fill in the IP address or hostname of the SV-DDNS server.
DDNS Port Fill in the access port of the SV-DDNS server.
6. Click Update, and then save the settings. They will be implemented after the unit is
restarted (see Saving Configuration Changes, page 139).