User guide

SerVision MVG 400 System Guide
Configuring the MVG 400 77
Figure 67: Proxy and DDNS Settings screen
2. If you are using a proxy for remote access, under Proxy, select Enabled. The fields
required to configure the proxy settings are added to the screen.
Figure 68: Proxy settings
Fill in the fields as follows:
Field Description
Use Select the network connection to use to connect to the proxy server:
• Any: The unit can use any available network connection; it will
connect using the highest priority connection available (as
defined under Network Priorities; see
Network Priorities ,
page 73).
• LAN: The unit should only use a LAN connection. If none is
available, the unit will not connect to the proxy server.
• WiFi: The unit should only use a WiFi connection. If none is