User guide
SerVision MVG 400 System Guide
Configuring the MVG 400 75
NOTE: Be sure to assign a static internal IP to the device before you set up port forwarding
to it (see Connecting Devices to the MVG 400’s Internal Network, page 27)
D
D
D
To configure port forwarding for a device connected to the unit's router:
1. In the Main Menu, under System, click Port Forwarding. The Port Forwarding screen
opens and displays a list of the ports that are already open for remote access and the
internal IPs of the devices to which they provide access.
Note: The system and configuration ports of the unit (see About Ports, page 48) are
defined automatically by the system and cannot be modified.
Figure 65: Port Forwarding screen
2. In the next available row in the table, fill in the fields as follows:
Field Description
Port The number of the port to assign to the device. You can choose any
number in the range 1–65535 that is not already in use.
IP The internal IP of the device