User guide

SerVision MVG 400 System Guide
Configuring the MVG 400 72
you want to be able to access the MVG 400 remotely – you should assign a static IP address
to the unit instead.
D
D
D
To assign a static IP address to the MVG 400 in the wireless network:
1. In the WiFi Configuration screen, click Network Settings. The WLAN Settings screen
opens.
Figure 61: WLAN Settings screen
2. Clear the Enable Dynamic IP (DHCP) checkbox. The fields required to configure the
static IP and other network settings are added to the screen.
Figure 62: Settings for a static IP in the WiFi network
3. Fill in the fields as follows:
Field Description
IP Address Specify the static IP address of the unit in the wireless network. The
address should conform to the standards used in the wireless
network.
Subnet Mask Fill in the subnet mask used in the wireless network.