User guide

SerVision MVG 400 System Guide
Configuring the MVG 400 71
Figure 59: WiFi Configuration screen when no WiFi card is connected to the unit and
an access point has not been manually configured
2. In the Manual Definition line, fill in the fields as follows:
• Under SSID, fill in the SSID of the access point.
• If the access point requires an encryption key, under Key, fill in the key.
3. In the Manual Definition line, click Update. The settings of the access point are saved,
and the access point is selected. The Current SSID field is added to the screen and
displays the name of the access point. If the MVG 400 unit comes within range of the
specified access point, it will automatically connect to it and become part of the wireless
network managed by the access point.
Figure 60: Current SSID field displaying currently selected access point
4. Save the settings and restart the unit to implement them permanently (see Saving
Configuration Changes, page 139).
Setting Wireless Network Settings
By default, the MVG 400 is assigned a dynamic IP address in the wireless network when it
connects to the access point. If the MVG 400 will only need to use the wireless network for
outgoing connections to the internet, this is enough. If you need incoming access to the unit –
Current SSID
field