User guide

SerVision MVG 400 System Guide
Configuring the MVG 400 70
Figure 57: Access point selected (In Use)
Note: If the selected access point is not within range when the
WiFi Configuration screen
is opened, the Current SSID field is added to the screen. The field displays the name of
the selected access point.
Figure 58: Current SSID field displaying currently selected access point
4. Save the settings to implement them permanently (see Saving Configuration Changes,
page 139). It is not necessary to restart the system.
D
D
D
To configure an access point without a WiFi card connected to the unit or
when the access point is not in range:
1. In the Main Menu, under System, click WiFi. The WiFi Configuration screen opens (This
may take a minute or two.):
Current SSID
field