User guide

SerVision MVG 400 System Guide
Configuring the MVG 400 67
Figure 54: GSM settings
3. If CDMA is enabled, fill in the fields as follows:
Field Description
User Name If the cellular supplier requires a user name, fill in the user name.
Password If the cellular supplier requires a password, fill in the password.
LCP Echo Select Enabled if you want the system to periodically test the
network connection after it is established (see page 65).
4. If GSM is enabled, fill in the fields as follows:
Field Description
APN Fill in the APN of the cellular network.
User Name If the cellular supplier requires a user name, fill in the user name.
Password If the cellular supplier requires a password, fill in the password.
PIN Code If the SIM card of the modem requires a PIN to establish a
connection, select Use. The PIN Code field is added to the screen.
Type the PIN code into the field.
Dial Number The phone number that the modem should dial to connect to the
internet via the GSM cellular network. This number is normally *99#
throughout the world.
LCP Echo Select Enabled if you want the system to periodically test the
network connection after it is established (see page 65).
5. Click Update. The settings are immediately implemented on the unit. If the modem is
connected to the unit, and the configuration settings are correct, the unit connects to the
cellular network through the modem.