User guide

SerVision MVG 400 System Guide
Configuring the MVG 400 43
Figure 32: Save Settings screen
6. In the
Save Settings screen, click Save Changes to System. The unit stores the changes
permanently, and the
System Restart Page screen opens:
Figure 33: System Restart Page screen
7. Click Restart System. The unit restarts, and the changes are implemented. You are
automatically logged out of the configuration utility.
Note: Changes to the settings in the configuration screens only take effect on the
MVG 400 unit after they are saved and the unit is restarted, as describe in steps 5–7. For
additional information, see Saving Configuration Changes, page 139.
Note: For security reasons, a configuration session times out after 15 minutes. If the
configuration utility is open with no user activity (pages loaded) for more than 15
minutes, you must perform the login procedure again to continue configuring the