User guide

SerVision MVG 400 System Guide

Configuring the MVG 400 41

Figure 30: System Summary screen

To open a configuration or functional screen:

• In the Main Menu, select the relevant summary screen, and then select the desired screen.

In addition, there are two buttons in the upper-right corner of the screen:

• Logout: Logs you out of the configuration utility and displays the

• Help: Opens a browser window and navigates to the SerVision website, in which you

can find information about configuring and working with your MVG 400 system,

including the most up-to-date version of this manual (under

Support->Documentation->Manuals and Product Overviews)

These buttons are available whenever the configuration utility is open, regardless of which

screen is displayed.

Using the Configuration Utility

Typically, the configuration process proceeds as follows:

To configure the MVG 400 unit:

1. In the Main Menu, click one of the links or tabs to open the desired summary screen, e.g.,

Cameras or Sensors. The configuration summary screen opens.

2. Click a link in the

Main Menu or in the summary screen to open the desired configuration

screen. The configuration screen opens.

3. Modify the settings in the configuration screen as necessary, and then click Update to

store them on the unit. The changes are saved in a temporary cache on the unit, and an

Update Confirmation message appears at the lower left of the screen, below the

Main

Links to

confi

uration and

functional screens

Summary

screen name