User guide

SerVision MVG 400 System Guide
Configuring the MVG 400 37
Once the network settings of the unit have been configured, such that the unit can be accessed
remotely via the internet, the configuration utility can also be accessed remotely. For
additional information, see Opening the Configuration Remotely, page 44.
In general, the easiest way to open the configuration utility is through the MultiClient, as
described below. Nevertheless, in many cases, the configuration utility can also be opened
manually in a browser, without using the MultiClient. It is not advisable to use this method
the first time you open the utility, before the network settings are configured. For additional
information, see Opening the Configuration Manually, page 45.
This chapter explains how to work with the configuration utility – how to open it, access its
main menu, and navigate to the various configuration screens. The menu options and their
settings are described in detail in the following chapters.
Opening the Configuration Utility
When you first open the configuration utility of the MVG 400 unit, you should open it
through the MultiClient, as explained in this section. The PC on which the MultiClient is
running must either be on the same network or be connected to one another by a network
cable. This method of opening the configuration utility is recommended whenever the PC on
which the MultiClient is running is on the same network as the MVG 400.
D
D
D
To open the configuration utility:
1. Open the MultiClient.
2. In the MultiClient, at the bottom of the
Connection Panel, click the Search button.
Figure 25: Search button
The
Find Gateway dialog box opens, and displays a list of all the SerVision systems
connected to the network.
Connection
panel
Search