User guide

SerVision MVG 400 System Guide
Installing the MVG 400 System 24
Figure 14: Internal speaker
Connecting a Speaker or Headphones
You can connect an external speaker or headphones to the MVG 400.
D
D
D
To connect a speaker or headphones:
1. Install the speaker in its desired location, if necessary.
2. Plug the speaker or headphone connector into the Audio Out connector (Aout).
Connecting a CCTV Monitor
You can connect a CCTV monitor to the unit. The monitor offers an alternative way to view
live video from the MVG 400. It is primarily useful if you want to view video when the user
is near the unit. For example, if the MVG 400 is set up in a bus, the driver can use a CCTV
monitor to keep tabs on parts of the bus that cannot been seen from the driver’s seat.
The following types of monitors can be used:
• Surveillance monitors: Monitors that are designed to be plugged directly into
surveillance cameras.
• Entertainment monitors: Monitors that are intended to be plugged into portable DVD
players in vehicles.
• Standard television sets with AV connectors
To connect the monitor to the MVG 400, you will need a cable with the following connectors:
• An appropriate connector (BNC or RCA) for the Video-In connector of the monitor.
(Consult the monitor documentation or your vendor to find out which kind of connector
is required for the particular monitor you are using.)
• A BNC male connector to connect to the TV-Out connector of the MVG 400. (A cable
with an RCA connector can be used by attaching a BNC-to-RCA adaptor to the
connector. See figure 4, page 15.)
Internal speaker