User guide

SerVision MVG 400 System Guide
System Diagnostics 180
Figure 183: Command Window
2. In the Command Window, type
tracert <IP>, where <IP> is the IP address of the
MVG 400. For example, type
tracert 216.10.144.11
3. Press Enter. Traceroute sends three packets, and follows their route for up to 30 steps
from the sender to the target. For each step in the route, the time it took for each packet
to arrive from the previous machine, and the IP of the current machine, are displayed.
.
Figure 184: Results of successful Traceroute