User guide

SerVision MVG 400 System Guide
Resetting the Unit 157
• You change the recording size or disk allocation settings of one of the cameras (see
Advanced Recorder Settings, page 112).
You can also erase all recorded video from the hard drive manually in one of the following
ways:
• Erase all recorded video from a selected camera
• Erase all recorded video from all cameras but leave the current disk allocation unchanged
• Erase all recorded video from all cameras and reset the disk allocation to its default
settings
Erasing All Recorded Video from a Camera
You can choose to erase all the recorded video from a selected camera that is stored on the
unit’s hard drive. This is particularly useful if you have chosen to record linearly (selected
Write Protect in the camera’s advanced recorder settings) and the disk space allocated to the
camera is full.
D
D
D
To erase all recorded video from a camera:
1. In the Camera Summary screen, in the Recorder column, click Erase in the camera’s
row.
Figure 151: Erasing video from a camera
2. You are prompted to confirm that you want to erase the video:
Erase recorded video
from Camera 3