User guide

SerVision MVG 400 System Guide

Connecting to the MVG 400 146

Connecting to the MVG 400

Once the system is installed and configured, you can connect to it with a client device. This

chapter explains how to connect to the MVG 400 using the MultiClient from a PC that is

either on the same LAN as the MVG 400 or connected to the unit by an Ethernet cable. If this

is successful, you can then install the MultiClient on a remote computer and connect to the

MVG 400 via the internet.

NOTE: If the MultiClient is not installed on the PC, see Installing the MultiClient, page 33.

NOTE: This chapter explains how to get started using the MultiClient, with the

MultiClient running on a PC that is on the same LAN as the MVG 400, so that

you can configure the system and make sure it is working properly. For complete

information about connecting to the MultiClient, locally or remotely, and using the

MultiClient to view video, monitor events, and control devices, see the MultiClient

User Guide.

To connect to the MVG 400:

1. Open the MultiClient.

2. In the

MultiClient, at the bottom of the Connection Panel, click the Search button.

Figure 136: Search button

The

Find Gateway dialog box opens, and displays a list of all the SerVision systems

connected to the network.

Note: If a Microsoft Windows Security Alert dialog box is displayed, click Unblock.