User guide

SerVision MVG 400 System Guide

Configuring the MVG 400 142

Figure 132: Changes Discarded screen

3. Continue configuring the unit as required.

Restoring Default Settings

If the unit does not function as expected, and you believe this is the result of recent

configuration changes, you can choose to restore all of the original factory settings to the unit.

You can then configure the unit manually once again, from scratch, as you would if the

system was just installed.

NOTE: If recent configuration changes have made it impossible to access the unit through

the local network, the factory settings can be restored as described under Restoring

Factory Settings, page 155.

To restore the default settings:

1. In the Main Menu, under System, click Save Settings. The Save Settings screen opens.

2. In the

Save Settings screen, click Restore Default Settings. The Confirm Restore screen

opens.