User guide

SerVision MVG 400 System Guide
Configuring the MVG 400 141
Figure 131: Restart confirmation message
Note: To continue configuring the unit, click the link and log into the configuration
utility again.
Note: If you do not restart the unit at this time, most changes are not implemented on the
unit, but they are saved on it. The next time the unit is reset, the changes are
implemented.
Discarding Changes
Once you have saved a change to the unit's configuration settings in the configuration utility,
the change is stored on the unit. When the unit is next restarted, the change is implemented. If
the unit has not yet been restarted, you can choose to cancel all configuration changes that
were not yet implemented. If you choose this option, the changes are erased from the unit, and
are not implemented when the unit restarts.
D
D
D
To discard all configuration changes that were saved but were not yet
implemented:
1. In the Main Menu, under System, click Save Settings. The Save Settings screen opens.
2. In the
Save Settings screen, click Discard Changes. The changes are canceled, and the
Changes Discarded screen opens: