User guide

SerVision MVG 400 System Guide

Configuring the MVG 400 139

Figure 128: Row name updated

4. Follow the instructions under Configuring a Standard Weekly Schedule, page 131 to

select the outlines to implement in each time slot.

Note: To assign the new schedule to a holiday, click Edit Holidays to open the

Holidays

screen. Follow the instructions above (see Defining Holiday Schedules, page 134) for

configuring the holiday. The new schedule appears in the holiday configuration section

in the Day dropdown list.

Saving Configuration Changes

As you make changes in each screen, you click the Update button to save the changes.

However, in order to complete the save operation and update the MVG 400, you need to carry

out the steps described below. Most configuration changes only take effect after you carry out

all of these steps.

NOTE: Changes to Modem, WiFi, Network Priorities, and camera brightness, contrast, and

saturation settings are implemented immediately when you click the Update

button. To save them permanently, the changes must be saved, but restarting the

unit is not necessary. All other configuration changes are implemented only after

they are saved and the system is restarted.

To save all changes:

1. Do one of the following:

• In the orange Update Confirmation message below the Main Menu, click “Click

here to go to Save Settings page.”

• In the

Main Menu, under System, click Save Settings.

The

Save Settings screen opens:

Name

dated