User guide

SerVision MVG 400 System Guide
Configuring the MVG 400 120
Field Description
page 87).
SMS Select this option to have the MVG 400 send SMS notifications
when the device triggers an event. Messages are sent to the
recipients specified in the
SMS and E-mail configuration screen in
the format defined there (see
SMS and E-mail Notifications ,
page 81).
E-mail Select the desired type of e-mail notification, as follows:
• None: Do not send e-mail notifications when an event is
detected.
• Text only: When an event is detected, send e-mail
notifications. Include a text message in the e-mail, but do
not attach any images to the message.
• Text & image: When an event is detected, send e-mail
notifications that include both a text message and a picture
of the first frame of the event. If multiple cameras are
attached to the device, a separate e-mail is sent for each
camera. If no cameras are attached to the device, no e-
mails are sent.
Note: E-mail messages are sent to the recipients specified in the
SMS and E-mail screen, in the format defined there (see
SMS
and E-mail Notifications
, page 81).
Note: If AVV is selected, Text & image is automatically selected
for this field. A single e-mail containing both the standard
notification text and the AVV notification is sent at the beginning
of each event. In addition, a text-only e-mail is sent when the file
transfer is completed.
Note: If AVV was once selected, and has since been cleared,
Text & image remains selected for this field until the selection is
changed manually. If it is not changed, AVV is not activated, but
notifications with snapshots are sent at the beginning of each
event.
Activator 1
Activator 2
(Sensors only)
For each sensor, specify the action that each activator should
perform when the sensor triggers an event, as follows:
• Turn on: Set the activator line to “high.”
• Turn off: Set the activator line to “low.”
• None: Do not change the activator’s status.
Note: These settings are not available for activators.