Installation guide

PVN SerVision
HVG400 Installation Guide
Introduction
4
Introduction
This guide explains how to set up the hardware components of PVN SerVision’s HVG400 security system. The
HVG400 belongs to PVN SerVision’s line of embedded Video Gateway units. These units provide state-of-the-art
security functionality, including live video streaming, video recording and playback, motion detection, sensor
management, real-time event notification, and device activation. All of these features can be accessed remotely via
PC, PDA, or cellular telephone. The standard HVG400 is optimized for deployment in homes and businesses in
which high- speed internet access is available through a cable-based local network (LAN).
Once the HVG400 has been installed as explained in this guide, it must be configured. Configuration is performed
by connecting to the HVG400 unit using a PC that is on the same network as the unit (or connected to the unit
directly using a LAN cross cable) and opening the unit’s configuration utility in a browser. For additional
information about configuring your HVG400, please refer to the Embedded Video Gateway System Guide.
Client software is used for accessing the HVG400 unit remotely in order to view video and events and control the
system in various ways. PVN SerVision offers client software for PCs and for certain cellular telephone and PDA
models. Full instructions for the use of the client applications are available in separate manuals, which can be
downloaded at http://www.pvn.co.id.