Installation guide
PVN SerVision
HVG400 Installation Guide
Connecting the HVG400 to the Network
20
Connecting the HVG400 to the Network
The HVG400 should be connected to a local area network (LAN). Once connected, it can be accessed either from a
PC on the same LAN network or via the internet through the LAN’s gateway (router).
To
connect
the
HVG400 unit
to a LAN:
Connect the Ethernet Out connector on the rear panel of the HVG400 unit to a LAN connection point (a hub,
wall socket, or any other connection point) using the supplied Ethernet cable (see The HVG400 Package,
page 5).