Manualshelf

Operator`s manual

ManualsBrandsServis-Rhino ManualsLawn MowerTURF FLEX P/N 00763618C
141142143144145146147148149150
MAINTENANCE
TX165A,135A,115A 02/11 Maintenance Section 5-5
© 2011 Alamo Group Inc.
MAINTENANCE
GAUGE WHEEL ASSEMBLIES
Gauge wheels are equipped with bushings which require grease daily. Grease fittings are provided in the
Wheel Hub and Gauge Wheel Pivot. Grease after 8 hours of use.
BLADE SPINDLE LUBRICATION
Blade spindles must be lubricated daily (every 8 hrs). Access lubrication fitting through hole in outer shields
and in center gearbox mounting. Each spindle must be lubricated enough each time to force small amount of
grease out through top seal.
NOTE: Do not overlube as excess grease may get on belt drive.