Operator`s manual
OPERATION
RC12 03-09 Operation Section 4-3
© 2009 Alamo Group Inc.
OPERATION
1. Standard Equipment and Specifications
RC 12
Cutting Width 144”
Cutting Height 1”-18”
Hitch CAT II-III T.H. Lift and Semi Mount or Pull Type
Blades Hard Surfaced with Tungsten Carbide; No “D” Ring
Horsepower Required: Lift 90 HP
Semi-Mount 90 HP
Pull 90 HP
Gearbox Rating (1000 RPM) 207 HP
Knife Tip Speed 12,620 FPM, Reverse Rotation
Driveline Size CAT 5 or 6
Hood Thickness 3/16”, with 3/16” Internal Wearlines
Weight (Approx.) 4025 lbs.
The Mower is designed for certain mowing applications and is rated to cut up to a specific
size vegetation (see Mower Standard Equipment and Specifications). DO NOT use this
mower to cut vegetation above the Mower’s rated capacity or to cut any type of non-
vegetative material. Only operate this Mower on a properly sized and equipped Tractor.
Operating this Mower in an application for which it is not designed and/or operating the
Mower with the wrong size Tractor can cause Mower component damage and equipment
failure resulting in possible serious injury or death.
(SGM-14)