Operator`s manual
OPERATION
RC12 03-09 Operation Section 4-14
© 2009 Alamo Group Inc.
OPERATION
• Ensure rubber deflectors are in position and not
damaged. Replace worn, broken, and missing
sections immediately.
• Ensure the driveline integral shield is in good
condition and rotate freely.
• Inspect that all bolts and screws are in position
and are properly torqued. OPS-F- 0004_A
• Inspect the condition of the drive belts.
• Ensure the drive belts shields are in place and
in good repair.
• Ensure the tractor PTO master shield is in
place, lowered and in good condition.
OPS-F- 0016_A
• .Inspect oil level in gearbox and replenish if
needed. A low oil level is a warning sign that
the gearbox may be cracked or its seal is
damaged and needs to be replaced.
• Perform scheduled lubrication as specified in
the maintenance section. OPS-F- 0017_A