Operator`s manual
To the Owner/Operator/Dealer
This Operator’s Manual is an integral part of the safe operation of this machine and must be maintained with the implement at all times.
A Manual canister is provided on the implement where this manual can be properly stored. If you lose or damage this manual a free
replacement manual can be obtained from an authorized Rhino dealer or by down loading the manual from the Rhino website www.
servis-rhino.com
BEFORE YOU START! READ, UNDERSTAND, and FOLLOW the information provided in this manual, the AEM Mower Safety manual
and the tractor operator’s manual carefully to learn how to operate and service your machine properly. Failure to do so could result
in personal injury to you and bystanders. All implements with moving parts are potentially hazardous. Every effort has been made to
ensure that this machine is safe, but operators must avoid engaging in unsafe practices and follow the written instructions provided.
The manufacturer has designed this implement to be used with all its safety equipment properly attached to minimize the chance of
accidents.
SAFETY FIRST. Completely read and understand the safety section of this manual before operating this equipment. Do not allow
anyone to operate this equipment who has not fully read and understood this manual. Contact your Dealer to explain any instructions
that you do not fully understand.
The care you give your Rhino Implement will greatly determine your satisfaction with its performance and its service life. Carefully read
and follow the instructions in this manual to provide you with a thorough understanding of your new implement and its intended use
and service requirements.
All references made in this manual to right, left, front, rear, top or bottom are as viewed facing the direction of forward travel with the
implement properly attached to the tractor.
Replacement Parts information is located in a separate Parts Manual. Rhino mowers use balanced and matched system components
for blade carriers, blades, cuttershafts, knives, knife hangers, rollers, drivetrain components, and bearings. These parts are made and
tested to Rhino specications. Non-genuine “will t” parts do not consistently meet these specications. The use of “will t” parts may
reduce mower performance, void warranties, and present a safety hazard. Use genuine Rhino mower parts for economy and safety.
For future reference, record your Rhino product model number and serial number.
Dealer Telephone Model Number
Owner Purchase Date Serial Number
Shredder
RSM5
01211
2013
341 Kg
540 rpm