Cov lus qhia

When extreme weather conditions are present, it is

recommended to lower and store the flagpole.

Patent Pending

Flag

YARD ARM KIT

Parts Included In Your Yard Arm Kit

A. Yard Arm (1)

B. Ropes (2)

C. Parts bag (1) Includes:

• Rope cleats (2)

• 3mm Screws (4)

• Arm bolts (May already be installed)

• Flag Clips (4)

Flags not included. Additional flag clips can be

purchased from service first.

385-985-7244

ServiceFirstProducts.com

Designed in USA, Made in China

Yard Arm

Instructions

Flag

PAGE 1
YARD ARM KIT Parts Included In Your Yard Arm Kit A Flag B g Fla C Flag A. Yard Arm (1) B. Ropes (2) C. Parts bag (1) Includes: • Rope cleats (2) • 3mm Screws (4) • Arm bolts (May already be installed) • Flag Clips (4) Flags not included. Additional flag clips can be purchased from service first. 385-985-7244 ServiceFirstProducts.com Designed in USA, Made in China When extreme weather conditions are present, it is recommended to lower and store the flagpole.
PAGE 2
PREPARING YOUR FLAGPOLE ASSEMBLING YOUR YARD ARM STEP ONE: Position the Cleat(s) 3-4ft from the bottom of the flagpole. Or to your preferred height. With a pencil or marker, mark where the holes will be. STEP TWO: Use a 9/64” drill bit to drill holes into the marked locations. Use extreme caution when drilling into your flagpole. STEP THREE: Using the 3mm screws provided. Secure the cleat to the flagpole (be careful not to over-tighten screws) STEP FOUR: Repeat steps 2-3 for each side of the pole.