User manual

19
After pressing the F7 function key, the ACPI command list will appear under the Channel ID list, shows
「►ACPI: POWER」「►ACPI: Sleep」「►ACPI: Wakeup」, which has 3 ACPI commands to choice as
follows:
1. Power：Press “Enter “will send a shout down command to chosen port.
2. Sleep：Press “Enter “will send a suspend command to chosen port.
3. Wakeup：Press “Enter “will send a Wake up command to chosen port. Only works on a computer in
suspend mode.
Press <↑>, <↓> key to switch the ACPI command to be sent. To send the SLEEP command, please see the
picture below: