User manual

14
NOTICE:
If the default value of「ACPI Suspend Type」item isn’t [S1], please follow the steps to change the setting:
1. Press <Enter> to open the item value selection window.
2. Move the high-light square to S1(POS), then press <Enter> to change the value and back to the「Power Management Setup」
setup page.
3. You confirm the value of「ACPI Suspend Type」item has already changed to [S1(POS)] at the「Power Management Setup」
page. Press <F10> to save the changes, the confirmation window will pop out as shown above, enter “Y” and then press
<Enter> to confirm the change and reboot the system.
4. The way to set the value of「ACPI Suspend Type」item at [S3(STR)] is similar to set up [S1(POS)] process. It will cause the
computer to be unable to be woken up by ACPI commands and can only be woken up by pressing the power switch.