User manual

ServerLink 8 / 16 Port KVM Switch
7
2. Hardware Installation
Before installation, please make sure all of peripherals and computers have been turned off.
2.1 Desktop or Rack Mount
The KVM switch unit can be placed on a desktop or rack mounted into a standard 19” rack.
Desktop
Stick the included self-adhesive footpads to the unit’s bottom panel at the four corners.
Figure 3. Footpads Installation
Rack Mount
The KVM switch unit can be mounted in a standard 19”rack.
1. Screw the mounting brackets into the sides of the unit at the front, as shown in the diagram
below. Take note of the length of your cables so that your computers, KVM Switch, keyboard,
mouse and monitor are distanced properly.
Figure 4. Rack Mount Installation