User manual

ServerLink 8 / 16 Port KVM Switch
6
1.6 BANK LED
When a slave KVM switch has been daisy chained, there are two methods to select the bank (KVM
unit) you want to operate: Hotkey and OSD. The BANK LED indicates the selected bank. A
maximum of 8 banks can be daisy chained.
1.7 Push Buttons
The LED’s on the front panel of the KVM switch also act as push buttons. Simply switch to a port by
pressing the corresponding button. After powering on the KVM switch, all console ports (Local or
Remote consoles) will be connected to computer port no. 1.
RESET: Pressing the RESET button through the small hole will cause the KVM switch to reboot.
1.8 Rear Panel
Optional KVM over IP Module
DC Power Jack
L
ocal Console USB Keyboard
&
USB Mouse Ports
Daisy Chain OUT Port
L
ocal Console VGA Port / Daisy Chain IN Port
Computer Ports