User manual

KVM over IP Module
28 / 99
Figure 4-6 Remote Console Options Menu:Cursor
• Video Settings
Opens a panel for changing the IP-KVM video settings. IP-KVM features two different
dialogs, which for adjusting the video settings.
Video Settings through the HTML-Frontend
To enable local video port, select this option. This option decides if the local video
output of IP-KVM is active and passing through the incoming signal from the host
system.
The option Noise Filter defines how IP-KVM reacts to small changes in the video
input signal. Turning on the noise filter can help reduce video flickering that is often
caused by distortions, as well as lowering unnecessary bandwidth consumption. A
large filter setting needs less network traffic and leads to a faster video display, but
small changes in some display regions may not be recognized immediately. A small
filter displays all changes instantly but may lead to a constant amount of network
traffic even if display content is not really changing (depending on the quality of the
video input signal). All in all the default setting should be suitable for most
situations.