User guide

MODEL:

SERVER EXPRESS

PUMP

ADA, PINCH VALVE,

LONG

07805

(Medium Fitting)

07392 (Medium, Large Fittings)

07398 (Medium Fitting,Thicker Dome)

07604 (Medium Fitting)

07726 (Small, Medium Fittings)

07794 (Small, Medium, Large Fittings)

SERVER EXPRESS

PUMP

ADA, PINCH VALVE,

SHORT

07405

(Medium Fitting)

07634 (Large Fitting,Thicker Dome)

SERVER EXPRESS

PUMP

RIGID, 16MM

07745

(Large Fitting,Thicker Dome)

01671-REVD_060514_ENGLISH

PAGE 1
01671-RevD_060514_ENGLISH MODEL: SERVER EXPRESSTM PUMP ADA, PINCH VALVE, LONG 07805 (Medium Fitting) 07392 (Medium, Large Fittings) 07398 (Medium Fitting,Thicker Dome) 07604 (Medium Fitting) 07726 (Small, Medium Fittings) 07794 (Small, Medium, Large Fittings) SERVER EXPRESSTM PUMP ADA, PINCH VALVE, SHORT 07405 (Medium Fitting) 07634 (Large Fitting,Thicker Dome) SERVER EXPRESSTM PUMP RIGID, 16MM 07745 (Large Fitting,Thicker Dome)
PAGE 2
PUMP DISASSEMBLY PUMP ASSEMBLY
PAGE 3
SERVER EXPRESSTM PUMP 07745
PAGE 4
PUMP CLEANING BEFORE FIRST USE AND AFTER USE DAILY, DISASSEMBLE AND CLEAN PUMP. IT IS IMPORTANT TO CLEAN, RINSE, SANITIZE, AND DRY THESE PARTS DAILY AND PROPERLY. FAILURE TO COMPLY WITH ANY OF THESE INSTRUCTIONS MAY VOID UNIT WARRANTY: 1 2 SEE UNIT TAKE DOWN FLUSH AND RINSE ALL INSIDE AND OUTSIDE SURFACES OF PUMP THOROUGHLY WITH HOT WATER. • Place lower end of pump into container of hot water and operate pump until all (if any) remaining product is expelled and only hot water flows from discharge tube.