Specifications

40  Operations

Installation and Operations Manual

The Email configuration page is used for setup and maintenance Email log support.

Enabling or disabling Email support:

Select Enabled or Disabled from the Email Notifications drop-down menu and click Apply.

Setting the SMTP server address:

Enter the IP address or hostname in the SMTP Host field and click Apply.

NOTE: Both IPv4 and IPv6 formats are accepted in the server address field.

Changing the SMTP server port:

Enter the port number in the SMTP Port field and click Apply.

Setting the ‘From’ email address:

Enter the ‘from’ email address in the ‘From’ Address field and click Apply.

Setting the ‘To’ email address:

Enter the ‘to’ email address in the Primary or Secondary ‘Send To’ Address field and click Apply.

Enabling or disabling event type notifications:

Select Enabled or Disabled from the Include…Messages drop-down menus and click Apply.

Features

The Features configuration page is used for activation and maintenance of special features purchased

from Server Technology. From this page an administrator can review all activated features as well as

activate newly purchased features.

To activate a special feature:

In the Feature Key Value field, enter the activation key provided by Server Technology and click

Apply.

NOTE: A restart of the PT22 is required after activating new special features.

Tools

The Tools section contains access to rebooting the unit, uploading new firmware as well as resetting the unit to

factory defaults. This section is available to administrative level users only.

Ping

You can use the Ping feature to test the ability of the PT22 to contact the IP address of another Ethernet-

enabled device. For LDAP support, it can also be used to test the configuration of the Domain Name server IP

address by testing for proper name resolution

NOTE: Both IPv4 and IPv6 formats are accepted in the Ping Host Name/IP Address field.

Change Password

The Change Password feature allows users to change their own password.

NOTE: An administrator can always assign a new password.

Changing a password:

Enter the current password, type a new password, verify the new password, and click Apply.