Specifications

38  Operations
Installation and Operations Manual
TACACS+
The TACACS+ configuration page is used for setup and maintenance of all settings required to enable
TACACS+ support.
Enabling or disabling TACACS+ support:
Select Enabled or Disabled from the TACACS+ drop-down menu and click Apply.
Changing the TACACS+ server port:
Enter the port number in the Port field and click Apply.
Setting the TACACS+ server address:
Enter the IP address or hostname in the Primary and/or Secondary Host field and click Apply.
NOTE: Both IPv4 and IPv6 formats are accepted in the Primary/Secondary Host fields.
Configuring the authentication order:
Select Remote > Local or Remote Only from the drop-down menu and click Apply.
NOTE: Server Technology recommends not setting the authentication order to Remote Only until TACACS has been
configured and tested.
Setting the TACACS+ encryption key:
Enter a key and verify the new key the Encryption Key and Verify Encryption Key fields. Click
Apply.
For security, key characters are not displayed.
Configuring TACACS+ privilege levels:
Click on the TACACS+ Privilege Levels link at the bottom of the page.
Changing an TACACS+ Privilege Level’s access privilege level:
Click on the Edit link in the Action column for the associated TACACS+ Privilege Level.
On the subsequent TACACS+ Privilege Level - Edit page, select Admin, User, On-only or View-only
from the Access Level drop-down menu and click Apply.
Granting or removing Environmental Monitoring viewing privileges:
Click on the Edit link in the Action column for the associated TACACS+ privilege level.
On the subsequent TACACS+ Privilege Level - Edit page, select Yes or No from the Environmental
Monitoring drop-down menu and click Apply.
Adding and Deleting outlet access:
Click on the Outlets link in the Access column for the associated TACACS+ Privilege Level.
On the subsequent LDAP Group - Outlets page, select or deselect outlets to be accessed by the TACACS+
Privilege Level and click Apply.
Adding and Deleting outlet group access:
Click on the Groups link in the Access column for the associated TACACS+ Privilege Level.
On the subsequent LDAP Group - Groups page, select or deselect outlet groups to be accessed by the
TACACS+ Privilege Level and click Apply.
Adding and Deleting serial port access:
Click on the Ports link in the Access column for the associated TACACS+ Privilege Level.
On the subsequent LDAP Group - Ports page, select or deselect ports to be accessed by the TACACS+
Privilege Level and click Apply.