Specifications

Logical Group Separators
Logical groups are separated by a thin blue line on the System Summary page as shown in the
following example between Tower A_InfeedA and Tower B_InfeedA:
This grouping includes master/link units in addition to some branched units.
Up to three blue line dividers can be displayed on the System Summary page between all sensor groups.
Outlet Control
The Outlet Control section offers access to the Individual and Group outlet control pages. From the
Individual and Group pages, the user can review and manipulate power control functions for all outlets
and groups assigned to the current user. Both pages include the outlet’s absolute and descriptive names,
the Outlet Status reported to the PT22 by the outlet, the current Control State being applied by the unit,
and the outlet load in amperes.
Available outlet and group power states may be set to on, off or reboot.
Individual
The Individual outlet control page displays all outlets assigned to the current user. The user may apply
on, off or reboot actions to individual, multiple or all accessible outlets.
To apply actions to individual or multiple outlets:
In the Individual Outlet Control section, select the desired action from the Control Action drop-down
menu for each individual outlet to be changed, and click Apply.
To apply an action to all outlets:
In the Global Control section, select the desired action from the Control Action drop-down menu and
click Apply.
Group
The Group outlet control page displays all groups assigned to the current user, as well as the outlets for
each group.
To select a group:
Select the group name from the drop-down menu and click Select. The page will refresh to display all
outlets associated to the selected group name.
To apply an action to a group:
Select the desired action from the drop-down menu and click Apply.
20  Operations
Installation and Operations Manual