Specifications

Web Interface
The Web Interface provides web-based access to the firmware. The interface is designed with three
major sections, illustrated below.
1. System Header: Shows device description, unit location, IP address and user/access information.
2. Navigation Bar: Provides access to unit configuration, control action, or status page.
3. Details Area: Current control/status information based on the page selected from the navigation bar.
This example shows the Outlet Control > Individual page:
Figure 3.1 Example of Firmware Web Page
Logging In
Logging in through the Web interface requires directing the Web client to the configured IP address of
the unit.
To log in by Web:
In the login window, enter a valid username and password and press OK.
If you enter an invalid username or password, you will be prompted again.
You are given three attempts to enter a valid username and password combination. If all three attempts
fail, the session ends and a protected page will be displayed.
NOTE: The default username/password for the PT22 is admn/admn.
16  Operations
Installation and Operations Manual