Datasheet

Intel
®
Server Board S5000PAL/S5000XAL TPS Jumper Block Settings
Revision 2.0
Intel order number: D31979-011
53
6.3 External RJ45 Serial Port Jumper Block
The jumper block J8A3, located directly behind the external RJ45 serial port, is used to
configure either a DSR or a DCD signal to the connector.
TP02303
J8A3
1-2: DCD to DTR 3-4: DSR to DTR
(factory default)
2
43
Figure 20. External RJ45 Serial Port Configuration Jumper