Troubleshooting guide

8
Installation and Service Manual
INSTALLATION
FOOTPRINT
The FlexTower must be secured to the countertop using the four (4) holes provided in the base of the unit and using
the hardware provided. Follow customer guidelines for placement of the unit or approximately 10 inches (25.4 cm)
from the edge of the counter. A mounting template is provided which is printed on the shipping carton. NOTE: DO
NOT DISCARD SHIPPING CARTON UNTIL MOUNTING TEMPLATE IS REMOVED. Also see the Footprint below.
CAUTION: Cutting the countertop may decrease its strength. Counter should be
braced to support the dispenser countertop weight plus ice storage capacity and
weight of icemaker, if applicable.