Instructions/Assembly Guide

7
Step 1--
1. Ensure all parts have been removed from the carton and place on a protected surface or carpet.
2. Check that all parts and hardware are the same as the “Parts List”.
3. Connect Seat Frame (1) to Back (2) using with Bolt (B), Spring Washer (E) and Flat Washer (D)
on the central position of Seat as shown below then tighten with Allen Key (F).
4. Please do not fully tighten Bolts (B) until the chair is fully assembled.
B
E
D
F
Approx 80% tight
B
E
D
F
1
2