ASSEMBLY INSTRUCTIONS Sofa So Comfortable, the moment you sit down.
Guidelines FAILURE TO FOLLOW THESE WARNINGS WHEN IN USE COULD RESULT IN INJURY • Do not stand on the item or use as a step ladder • The piece has been tested and approved for users weighing up to 250 lbs (113kg) per seat. • Do not use this item unless all bolts and screws are firmly secured and fastened. • Check all bolts and screws every 90 days. As necessary tighten if any are loose. • Lift up then move.
Pre-Assembly Preparation: Please read through this instruction booklet before beginning assembly of this item. Two adults are recommended for assembly. • Clear out the space for assembly and lay out all parts on Parts List, extra room will allow you to easily determine if all the pieces are present. • Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or hardware. • Keep small parts and pieces away from children and pets until fully assembled.
Parts List Thumb Bolts (4) Back Cushion (1) 5 Wood Legs with Washers (4) Seat Cushions (2) Arms Arms Seat Cushion Covers (2) Seat Frame (1) Back Cushion (2) Pillow(2)
Step 1-- Remove all parts from the carton and place them on a protected surface or carpet. Place the Seat Frame (D) upside down and open the bottom flap. Take the Back Cushions (H) then take Thumb Bolts (A), Wood Legs with Washers (B), Seat Cushion (F) out of the seat box.
Step 2-- 7 Attach Seat Frame (D) to Arm (C2) by sliding the receivers into the mechanism posts located on sides of Arm (C2), press down Seat Frame (D) then move Seat Frame (D) to attach the Arm (C1), press down on both sides of the Seat Frame (D) to firmly secure.
Step 3-- Insert Thumb Bolts (A) x 2 into holes on sides of Seat Frame (D) and tighten the bolts to Arms (C1 & C2).
Step 4-- 1. Slide the Back Frame (E) into the Seat Frame (D) & align the bracket on the Back Frame (E) until fully engaged. 2. Insert Thumb Bolts (A) x 2 into holes on sides of Back Frame (E) into holes on side of Arms (C1 & C2) and tighten the bolts.
Step 5-- 1. Secure the back cover to the hook & loop strip & secure the bottom cover to the hook & loop strip. 2. Turn over Seat Frame (D), remove the plastic caps on the threaded bolts of each Wood Leg (B). Attach the Wood Legs with Washers (B) to the corners of the sofa.
1. Open the vacuum packed Seat Cushions (F) by carefully cutting the bags with a pair of scissors. Insert Seat Cushions (F) into the appropriate Seat Covers (G). Ensure the cushion cover completely covers Step 6-- the the filler as image (2). When closing the zipper as image (3) the cushion is compressed. This will allow the zipper to close with ease. Fluff all cushions and pillows to allow them to expand. 2. Lastly, position all Cushions and Pillows (I) on the sofa.
Warranty 12
