Warranty Information

Step Two:

Step Three:

Position the assembled chair upright and insert the

Gas Lift (C) into the center hole of the chair.

Attach Seat Plate (D) to the bottom of the seat

cushion (with the front of the seat plate facing

the front of seat cushion). Attach by using 1”

Screws (E) for the holes of the Seat Plate (D) with

the Allen Key (F).

*Note: Align the Seat Plate so the FRONT on the

seat plate matches the FRONT label on the

bottom of the seat cushion. Tighten the screws

completely.

FRONT