PRODUCT GUIDE & ASSEMBLY INSTRUCTIONS Serra Always Comfortable.
Guidelines FAILURE TO FOLLOW THESE WARNINGS WHEN IN USE COULD RESULT IN INJURY « D6 not stand on the fem rouse as a step loader « Do not use this term unless all bolts and screws are rely secured and fastened. s Chagall bolts and screensaver 90 days, AS necessary Heighten if any ore loose.
WARNING: DO NOT LET CHILDREN PLAY IN OR AROUND THE UNIT DUE TO THE POSSIBLE RISK OF INJURY. Pr-Assembly Preparation: Please read through this intrinsic ion booklet before beginning assembly of thighs. Two dulls are recommended for assembly. = Clair out he space for assembly-and loy out oll pairs on Ports List, extra room will allow you to rosily determine if all the pieces are peasant.
Step 1 1. Ensure all parts have been removed from the carton and place on o protected surface or carpet. 2. Check all parts and hardware are the same as the "Pars List”. 3.
Step 2 1. Attach Front Ralph (2) to Left Arn click the bracket into the mechanism posts located on sides of Arn (1), press down Front Rail (2) then move Front Rail (2) to attach fo the Right Arm 4), press.down on both sides of the Front Rail (2) to firmly secure.
Step 3 Slide the: bracket on Back Panel 8) into the mechanism posts located on sides of Left Arm (1) & Right Arm (4) unfit fully engaged.
Step 4 Slide the bracket on the fencer of Bose Panel (3) info the mechanism posts located on the center of Back Panel (5) & slide: the bracket on side of base Panel (8) into the mechanism posts located on sides of Left Arm Right Arm ) until fully engaged.
Step 5 1. Open back cover and insert Thumb Bolts (A) x 2 into the holes on the Bock Frame (8) that connection the Arms (1) & (4) and the tighten the bolls, 2, Secure the back cover fo the hook & loop strip.
Step 6 1. Open the vacuum packed Seat Cushions (7) x2 by carefully cutting the bags with a pair of scissors. Insert the Seat Cushions (7) info the appropriate Seat Covers (8) os Image (13. Ensure the cushion cover completely covers the filler os Image (2), When closing the zipper ensure os image (8) the cushion is compressed, this will allow the zipper to close with ease. 2. Insert the Back Cushions (9) x 2 into the appropriate Bock Covers (10) & (11). 3. Kerfuffle cushions to allow therm to expand. 4.
