SER600019 SRX8 EVO Manual

STEp 67

M3x5

1- Cut the body along the cutting line with special

scissors (not included). Make holes for the

bodypost and antenna as needed with a body

reamer (not included). Make a longer bodypost

hole in the rear, to allow for chassis ex movement.

2- Before painting the body, apply the precut

masking sheet elements to the inside of the

body. Follow the cleaning & painting instructions

supplied by the polycarbonate paint supplier you

choose.

3- Apply the Serpent and Cobra logo-decals on

the body and wing.

Body Clip