SER600019 SRX8 EVO Manual

fRONT aSSEmbly

STEp 28 STEp 29

bag 6

24.1

24.2

8x16x5

8x11x0.1

5x13x4

M5x4

13x16x0.1

After building the differential with new gears, new differential

case and bearings, the diff may feel a little tight. The connected

parts need at least an hour run-time to create a perfect match.

Attention: When you assemble the diff with too much initial play, the

gears will not run-in properly and may wear quickly. After 1 or 2 hours

of running the car, re-check the gear-mesh

between the ring gear and the pinion. All parts

should have run-in properly now. You may

add or remove 8x11x0.1 shims as needed.

8x11x0.1

8x16x5

5x13x4

M3x22

13x16x0.1

M3x16

After 1 or 2 hours

of running the car,

re-check the gear-

mesh between the ring gear

and the pinion. All parts

should have run-in properly.

You may add or remove

13x16x0.1 shims as needed.

M3x22

M3x16

M5x4